- Brand: Master Airbrush
- Tank Volume: 1 Liters
- Material: Stainless Steel
- Item Weight: 3.04 Pounds
- Style: Gun
- Master HP Pro-33 Series Ultimate Kit: Includes a Master HP Pro-33 Series Elite Performance HVLP Spray Gun with 1.4mm Fluid Tip (Installed) plus complete 1.3 mm, and 1.8 mm atomizing sets with matching needle, fluid nozzle, and air caps. The Gun has a 1-liter aluminum cup and comes with a high-flow air pressure regulator with a gauge. The installed 1.4 mm tip is a more universal size. Includes an MPS Adapter to use disposable cups.
- 3 Fluid Tip Atomizing Sets: The ultimate spray gun set-up to spray the lightest to heavy coatings, and all with the same gun. The 1.3 mm and 1.4 mm fluid tip set-ups are ideal for use with base coats, clear coats, single stage, primer-sealers, and other light to medium viscosity paint coating materials. The 1.8 mm size fluid tip set-up is ideal for primers, 2K primers, surfacers, and other medium to high viscosity paint coating materials.
- Superior Atomization Technology: Achieve perfect performance with all paint coatings because of the innovative technology in this spray guns needle, nozzle, and air cap system. Paint coatings are fully atomized with the ideal fan pattern to lay down perfectly for a clean even basecoat or topcoat finish.
- Waterborne Compatible: Precision-engineered high-grade stainless steel components that are 100% suitable for the latest automotive waterborne paint coatings.
- Master Airbrush is an industry leader in Airbrush and Spray Gun Supplies, so purchase our products with the confidence that we’ll offer you a 100% lifetime satisfaction guarantee that if you’re not happy with them at any time, we’ll provide a full replacement or refund.


































Shawna Thornton –
The overall machining of this gun is good quality, the grip is comfortable and the adjust ability is very good and the cap’s are full of orifices for atomizing material, the problem is the 1.3, 1.4 tips and needles may do well if the viscosity of the material being sprayed is thin as water and even the 1.8 is fairly small even for clear coat unless it’s overly thinned which means more successive coats to get a good build.I tried the smaller tips and won’t use them again, you will blow more material into the air than on the surface trying to just get stuff through the tiny tips, I wound up using the 1.8 for a clear coat and still blew a lot in the air. If I were to buy the gun again I’d skip the 3 tip unit and go for the 2.0 or the 2.5, It’s easier to dial back fluid flow than it is to try to suck it out of a gravity gun… HVLP means high volume, low pressure, problem with this 3 tip set up is NO volume ! My advise is buy the gun, but get the bigger set ups you’ll be happy you did.PS this is Shawna’s husband
lorena davenport –
Not a high end name brand but I’m no pro either. Sprays very well, no complaints and it’s nice to have different tip sizes included
Amazon Customer –
Leaked over the hood when spraying , Had to resand and do it all over again , Didnt leak 2nd time havnt tryed a 3rd yet .
Jason Martin –
Worked great the first time I used it, cleaned it and put it away. Went to use it again and its leaking internally. Paint pours out from the backside of the needle near the trigger arm. Made a mess of everything while I was painting. Turns out I scuffed a plastic fitting inside the gun. $30 repair kit purchased to replace one tiny piece.If you have to rebuild the gun you will need a 9mm hex, no common in most hex key kits, and the part it fits into is reverse threaded.
donald raines –
Sprays great the 1.3 tip lays automotive clearcoat down like glass
James S. –
Shoots like a 1500$ gun works amazingly great for the cash
Stevesfatmetal –
Painted Jeep with this gun, and it worked out fine.
Diane K. Ravis –
This kit comes with 3 needles which makes for good flexibility. The best part is how nice it is to disassemble and clean. Very easy to use. I may end up obtaining a smaller cup because for many of my projects I do not need the large cup and thus it takes much longer to clean than a smaller cup. I would recommend this gun for anyone wanting to get into spray painting.