-30%
Cheap ???? Professional HVLP Gravity Feed Air Spray Gun, 1.4mm 1.7mm 2.5mm Nozzles, 1000cc Aluminum Cup With Gauge For Auto Paint, Primer, Clear/Top ???? Coat & Touch-Up Blue ????
Original price was: $44.99.$31.49Current price is: $31.49.
- Fast, friendly, always here to help.
- Quality that lasts, prices that don't.
- Buy with Confidence, Get Quality
- Shop with Ease
- Brand: B4B BANG 4 BUCK
- Tank Volume: 1000 Milliliters
- Color: Blue
- Material: Aluminum
- Style: Gun
- Package Include: 1 x Spray Gun; 1 x 1.4mm Nozzle; 1 x 1.7mm Nozzle; 1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun) ; 1 x 1000cc Aluminum Cup(1L); 1x True Micrometer Air Regulator with Gauge; 1 x Barbed Tail; 1 x Adjustment Wrench
- This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting.
- It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications.
- Light weight, ergonomic design and easy trigger pivot reduces operating fatigue.
- Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty.
| Size | 1.4mm 1.7mm 2.5mm – 3 Fluid Tip |
|---|---|
| Color | Blue, Red |
8 reviews for Cheap ???? Professional HVLP Gravity Feed Air Spray Gun, 1.4mm 1.7mm 2.5mm Nozzles, 1000cc Aluminum Cup With Gauge For Auto Paint, Primer, Clear/Top ???? Coat & Touch-Up Blue ????
Add a review
Related products
-30%
Original price was: $29.99.$20.99Current price is: $20.99.
-30%
Original price was: $15.45.$10.82Current price is: $10.82.
-30%
Original price was: $9.69.$6.78Current price is: $6.78.
-30%
Original price was: $42.98.$30.09Current price is: $30.09.
-30%
Original price was: $49.95.$34.97Current price is: $34.97.
-30%
Original price was: $28.66.$20.06Current price is: $20.06.
-30%
Original price was: $19.99.$13.99Current price is: $13.99.
-30%
Original price was: $61.75.$43.23Current price is: $43.23.
Eduardo Yacab –
I was skeptical of this product. Here’s a few good/ bad pointers.- It has 3 different tip size which is great and you can decide which works best for the type of project you need it for. Unlike other guns that only bring one and you are stuck with just that one.- the cup is a pretty good size and holds a good amount of material- it also brings a pressure regulator on the gun which gives you better control of the psi you need for the various projects.WHAT I DIDNT LIKE- The cover of the cup. It does not screw on but rather just sets in place. It makes me uncomfortable when I’m going to spray at an angle as it gives me the fear that the cover will fall off. I would prefer a screw on cover.- Although it’s not been a real problem as yet but it seems to be an issue to spray too low to the floor or any object that could be below. The hose connector is at the bottom and after adding the regulator plus a liquid separator/filter to the gun it becomes uncomfortable. I would prefer the hose connection to be on the side if possible to have better flexibility.In general it has performed pretty well and I have not had major issues.
Geran R Brown –
I received this yesterday and started painting with it within the hour. The first comment i need to make is about the lid, THE LID ON MY UNIT IS TIGHT AND DOES NOT FALL OFF. Maybe they saw the comments and fixed the issue others have had.i was using the 2.5mm nozzle and found there were no leaks at all. I tested with water first and then switched to a heavy Behr Premium Latex paint and primer in 1. The first batch of paint i used floetrol and water to thin it out and it sprayed just fine. after i drained that first container i started putting paint with no water or floetrol and the gun still worked fine.I have a 60 gallon air tank with a 3.5 hp pump, it has two air/water seperator filters in line and i set my line regulator to 55 PSI which it holds even under load. I did not use the supplied regulator at all since i have a much better regulator on my drop line. I use high flow quick connects too so no restriction at the connection point. I could spray non stop without running out of air and the gun never stopped longer than refilling for 3 hours.Cleaning was really easy, i just ran water through the sprayer and rubbed all the splatter off the outside with copious amounts of water. i also disassembled the gun and brushed out the inside as well. Just remember when assembling the gun, you dont need to torque it down hard, you will have to dissasemble between jobs anyway so just snug it down and move on. Dont make more work for yourself.The only reason its not 5 stars is the fit and finish does feel cheap with flexing on the handles and sharp bits on the machined metal.
Amazon Customer –
It works very well for both basecoats and clear.
kent a. –
I was painting a truck and it had all types of issues and wasted 500 bucks on paint because of it Warranty says 2023 but 30 days is it to return
Cbreeze100 –
Sprays oil based poly super nice
Mateen –
This is a good gun for amateur auto paint job. If you have an older car and don’t want pay through nose to get it painted, it will do the job but honestly there are ones around $140 that will do a much better job. I keep this one for primer or furniture painting. Overall it’s worth the money for sure. You wont feel like you were robbed by another bs product.
Silas Hamilton Jr. –
Nothing, like the way it performs
Gustavo Blandon –
Todo perfecto.Amazone.lo.mejor