- Use to keep your spray guns running effectively!
- Allows you to have precise air control at the gun for the best and consistent results
- It fits any professional spray gun.
- Reads up to 180 PSI and has a bar level up to 12.
- This regulator has a 1/4″ NPS (M) Inlet and a 1/4″ NPS (F) swivel Outlet.
Cheapest ???? TCP Global Brand Air Adjusting Valve Regulator With Gauge For Spray Guns And Pnuematic Tools (1/4″ NPT) ✨
$19.99 Original price was: $19.99.$13.99Current price is: $13.99.
SKU: AMZ-B001OZJNUS Category: Spray Guns & Accessories
- Fast, friendly, always here to help.
- Quality that lasts, prices that don't.
- Buy with Confidence, Get Quality
- Shop with Ease

8 reviews for Cheapest ???? TCP Global Brand Air Adjusting Valve Regulator With Gauge For Spray Guns And Pnuematic Tools (1/4″ NPT) ✨
Add a review Cancel reply
Related products
-30%
Rated 4.43 out of 5
-30%
Rated 4.57 out of 5
-30%
Rated 4.29 out of 5
-30%
Rated 4.71 out of 5
-30%
Rated 4.14 out of 5
-28%
Rated 4.43 out of 5
-30%
Rated 4.71 out of 5
-30%
Rated 4.57 out of 5



















Jeff Chandler –
Replaced the original gauge in my DeVilbis spray gun. That one was dead out of the box. This one functions well and it easy to see.
Matt n. –
????????
Wholesale Rat –
This regulator worked fine the first few times I used it. But then it became unpredictable. I use a supply regulator set at 60psi and this regulator set at 20-30psi depending on the job. Once set, the pressure wanders all over the place. Sometimes it will climb to 40psi, so I reset it to 25psi. Then it will drop to 10psi or sometimes it drops to near zero. I reset it and the game starts all over again. Every 2 or 3 minutes I find myself adjusting this thing. I finally took it off and put it in the trash where it belongs.
cesar cantu –
Unit is exactly what it says does exactly what it says correct measurements
Richard D Hibbs –
I should’ve bought a better brand or a more expensive that keeps better pressure or the right pressure this does not
Wayne Johnson –
Just what I expected.
Josh McGee –
The regulator worked great for the 1st 4 times I sprayed the 5th time the regulator started being inconsistent and jumping I would have to stop disconnect a up disconnect air reconnect air and then it would start working again. I was able to finish the car but with the inconsistency it caused a couple runs run’s cheap it works for their 1st couple times but it failed in the end I still have it it’s just inconsistent now
Jacob Libke –
Nut was already mostly stripped and didn’t work right.