- Brand: Dynastus
- Color: Silver, White, Blue, Black
- Material: Composite
- Item Dimensions LxWxH: 7.87 x 4.25 x 4.72 inches
- Style: Gun
- Suitable for water-soluble paint and variety of spray paints, dedicated to car repair industry, top quality furniture, and other precision equipment which need fine surface finishing.
- Composite construction for lightweight and comfortable for longtime operation even in winter time.
- Requires minimum 3/4 hp compressor, HVLP (High Volume Low Pressure) to get superior finish and save paint, Super-precision external mix cap for perfect pattern.
- Built-in 3 control knobs: Fluid control regulates amount of paint sprayed, Pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow
- Includes extra spanner, handle tooth brush, plastic and aluminum cup, filter, 120 mesh paper filter funnel, helping you get the best end result






















Lhester87 –
I found this looking for a paint gun that I had previously purchased on Amazon. This one looked very similar and came with the metal paint cup as well as the plastic one. This paint gun is great for thin paints with the 0.8mm tip. I use these for cerakote and they work fantastic when you get them setup correctly. I would give this 4 or five stars, however, this paint gun does not have its own regulator setup and the air fitting is a strange size going into the handle. I had to make an adapter to install a regulator on it. That was the only thing I was unhappy about.
Wiz –
I am doing a motorcycle restoration so good painting is a must, this little thing worked great and was cheap to boot. I recommend if you need to do painting of any kind on a budget.A word of warning, you may see the nozzle size and think you need to thin crap out of your paint, but resist, I found that in some cases it would spit every now and again with an overly thin mixture, keep it on the thicker side of thin and it sprays on great and leaves a nice finish.
jeff b. –
Well I definitely had my doubts when I saw some of the reviews but my instincts said this is just what I needed.I purchased this specifically for applying Dura-Coat which is a firearms finish. Many of the manufacturers of these products say you can use an airbrush. NOT. Anytime you need to use a hardener an airbrush is a hassle. This gun did everything I needed it to do with no flaws, it actually exceeded my expectations. Check all of the connections before using and tighten if needed. The base nut on the trigger was loose and just needed to be cranked down. By the way, the tip is .8mm not 2.8 and that helps if you’re doing smaller projects!
wilson cheng –
used it to spray my wheels. works good. make sure you shop around within Amazon. You can find better deal for the same gun that comes with air valve gauge that make it better
Darren –
I have only good things to say about this spray gun. I used it for spraying Cerakote and it worked perfectly. Spray pattern was consistent and my finish turned out perfect. I did use a local pressure regulator and water filter on the line next to the gun to keep it in the right range. Between the regulator on my compressor and the local one it held steady and gave great results.
RyanC –
Spray gun was great although I found the threads into the comoosite body to be a little iffy. Contacted the seller and everything was resolved very fast and above expectations. Would definately reccomend products from the seller
Hallboy –
The media could not be loaded. Easy to use and set up. Clean up is simple as well. I was worried about the composite and the cleaning chemicals buts awesome. Spray adjustments are solid and stay put. Fan control is easy to manage and stays where you put it.
Bargain Quien –
This is so far the best small light weight sprayer I’ve tried. And I’ve tried a lot. Don’t waste money on the cheapest ones from China , you will be very disappointed ????