AME International currently distributes tools and equipment to all major markets worldwide. With a complete range of OTR tire and tire-related accessories and equipment AME serves all aspects of wheel and tire service. Strong steel construction with low pickup height.
- Fits 1/2″ Impact Wrenches
- Abrasive Pad cleans around wheel stud and surface of hub
- Clean Surfaces Promote a better balanced wheel and smoother ride
- A must for any garage
- Replacement Pads Number 37335



















G. Kuo –
Cleaned rust and off Lexus hubs in seconds after ROLOC discs barely made any progress with several minutes of work. I needed to clean entire surface of all four hubs and this was the key to doing it efficiently. At the rate that ROLOC discs were working it would have been hours of work. This turned the job into minutes per hub. Only issue was the cleaner wears down with usage and was just barely sufficient abrasive head life to all four hubs. Two would be safest bet, but these are not cheap. On the other hand, the time saved easy rust removal made me very grateful I ordered one.
txlady –
After seeing a YouTube video I had to have one. Lots easier and faster than using a wire brush to clean my hubs before installing my tires. A must have to clean your lugs and hubs
Steven Schaff –
I had higher expectations for durability of the scrubbing pad other than that works as it should
Michael –
bought to a brake change on my moms suv. worked great for cleaning the hub bolts before installing new rotors. Should have came with at least one refill.
Steve Porter –
I have used mine to clean just as many rusted wheel studs and caked rotors as the other guys in the shop. But mine cost about 30% of what their’s did.
Dan Shoup –
It works just like it should, and I haven’t worn it out yet.
Lyrehc N –
Received Hub Buddy without the disc.
Cleigh –
It does what it is supposed to do! It’s a little pricey for what it is but definitely one of those tools you’ll use time and time again once you own one! It’s good practice to always clean the hubs to ensure positive contacts between parts especially in the Midwest where we deal with alot of rust. I do wish the replacement pads were cheaper but as long as you don’t abuse it the original pad should last quite awhile