Deals ???? Dualco Grease Gun With Short Nozzle ????

8 reviews for Deals ???? Dualco Grease Gun With Short Nozzle ????

1. 

   Rated 5 out of 5

   Raleighphile – May 24, 2011

   I really like this little grease gun for working on bicycles.It saves a lot of money over buying expensive bicycle grease in disposable applicator bottles. I use Castrol NGLI-2 lithium wheel bearing grease I buy at the local auto store for about $5 in a quart tub. This is very high quality grease and is much more economical than grease you can buy in the tube.Filling this grease gun is simple and easy. Use a clean applicator like a disposable plastic spoon so you don’t contaminate your bulk grease container. The process is as simple as unscrewing the base and glopping the grease inside after pushing down the little follower bottom seal that rides up and down under the grease. Screw the base back on and push up the bottom seal through the keyhole in the base to press out any extra air. You can use a screwdriver or small rod to do this. Prime the pump by just squeezing the palm trigger a few times while pushing up on the bottom seal to get any remaining air out until grease flows with the pump without help from pressing up on the bottom with your screwdriver or rod on the follower.Grease flows from the nozzle aperture in a very small easily-controllable flow. I bet one could find different nozzles to fit on this tool if you wanted to change the flow rate but the one that comes with this grease gun is just perfect for my purposes working on bikes. Filling a bearing race on a bicycle application takes about 5-6 pumps -it is that precise. There is very little waste or mess as you can put it exactly where you want it and not have to use too much.Pros:*Re-usable, re-fillable, can use bulk grease of any type.*Easy to fill.*Doesn’t leak all over.*Precise and good for small precise grease work.*Small size fits into your tool box so it is right there when you need it, not on the shelf somewhere or hanging on the far wall of your shop.Cons:*Sort of expensive for such a small tool sometimes depending one who has it.*Goes in and out of availability and is hard to find -even here on Amazon. That might be why it is expensive at times.. I’ve never seen this brand at a retail store or LBS. If you find one snap it up!

2. 

   Rated 5 out of 5

   DW – May 21, 2022

   Works well. Finish is a bit rough.Pictured, is the first grease gun I bought that didn’t have an actual hole in the nozzle. Exchanged without an issue.

3. 

   Rated 5 out of 5

   DanH – July 25, 2022

   Great little spot greaser for small jobs enables you to get just about anywhere you need to spot grease

4. 

   Rated 4 out of 5

   Firemanz84 – August 10, 2022

   I use one of these for my chainsaw bar and when we purchased a new machine where I work that had small slides that need greasing I thought of this and it works perfectly.

5. 

   Rated 4 out of 5

   HMARTIN – August 17, 2022

   I use it to squeeze the exact amount of my custom gun grease into each cylinder, before I press the ball. This grease is stiffer than most factory greases; but it works well! 1000 times better than the other mini grease gun I was using.

6. 

   Rated 5 out of 5

   Miguel Hastedt – August 27, 2022

   I’m use for greased ratchet and vice tool

7. 

   Rated 5 out of 5

   Casey – October 14, 2022

   Handy little tool. Looks like you can change to a different length nozzle too if you want (Not included). Great for working on bikes ????

8. 

   Rated 4 out of 5

   Clooso – October 28, 2022

   Read the instructions carefully concerning loading and priming the grease.Only wish it had a carry case so that if the plunger handle gets bumped you’ll have grease everywhere.